Blink Cocoa

h1. Presence

h2. Design Principles

Blink should work with any SIP and XCAP servers that supports the same standards as Blink. There is nothing proprietary that would stop interoperability between two Blink clients using any properly configured SIP and XCAP server. Also there is nothing that should stop Blink interoperate with other SIP clients as far as SIP signaling is concerned. The only interoperability issues should be related to accessing the same XCAP documents by different clients. Blink would co-exist with any other SIP client that is using XCAP documens, that is it will preserve any information it did not create in those documents. Unfortunately, we have not found other clients that behave in the same way.

h3. Standards

The following standards are implemented (fully or partially).

http://sipsimpleclient.com/projects/sipsimpleclient/wiki/SipFeatures#Presence

h3. Disclaimer

There is no guaranty Blink Presence functionality would interoperate with other SIP clients or SIP servers due to the freedom allowed by the standards. 

h3. Interoperability

Presence is a complex issue and the mechanisms used internally by Blink may not necessarily work under your own server environment. If you want to troubleshot when things do not work as expected, first use the built-in Blink accounts that are designed to work with SIP2SIP domain. As protocol traces for signaling and storage are logged to file, you can easily access such debug information and analyze Blink behavior.

We can provide support, if you encounter interoperability issues with any the following products and services against Blink has been fully tested:

 * SIP2SIP.info (a public free SIP service)

 * Interoperability with any XMPP domain (using SylkServer SIP/XMPP gateway)

 * OpenSIPS/OpenXCAP combination (server software you can run on your premisses)

You can also enable one SIP2SIP account in your Blink instance to perform presence and contact storage operations while using your preferred SIP provider to make phone calls.

h3. Support

As presence require proper infrastructure that many SIP service providers simply lack today, do not complain to us when Presence does not work with your SIP service provider. 

h2. Contacts

Contacts are stored on the XCAP server in the resource-lists document under a proprietary name space to avoid conflicts with other end-points that might use the same document as there is no common standard way for how to store a rich address book on a server. This means that different SIP user agents from different vendors cannot read or modify this data in a deterministic way. The contacts in the address-book are then used by standard OMA rls-services and pres-rules XCAP documents. The SIP and XCAP servers need to support OMA style XCAP documents in order to interoperate with Blink.

Contacts have two Presence related properties that can changed in Edit Contact Panel Subscriptions section:

 * Subscribe to Contact's Presence Information

 * Allow Contact to see my Presence Information

 * If an URI part of the contact is labelled as XMPP, when using a SIP2SIP.info account the session request will be forwarded to an XMPP gateway. 

h2. Watcher Information

Using SUBSCRIBE for presence.winfo event package, Blink keeps track of presence watchers and their status.

 * Contacts that have subscribed to our presence are rendered in the 'New Contact Requests' group that is rendered on top of the contacts list. Right click or dragging the contact can be used to allow or deny the request. Blocked contacts are displayed in the Blocked group.

 * Active watchers are shown in Status -> People Watching  My Presence Activity menu

h2. Published Presence

Using PUBLISH method for presence event package, the following information is published by Blink:

h3. Basic Status

Open or closed.

h3. Extended Status

Blink uses a proprietary extension for indicating the extented status compatible with XMPP end-points. 

h3. Location

Location is based on CIPID map extension. Location can be disabled per account in Presence section of account preferences.

h3. Homepage

A home page can be entered in Presence section of account preferences. Homepage is based on CIPID homepage extension.

h3. Note

Presence note can be typed in the text area right to own icon in the main GUI window. Note is attached to the service.

h3. Status

Presence status can be changed from the main GUI window and Status menu. Last combination of Presence state and note are saved in the history build at the end of the menu. 

h3. Icon

User icon is uploaded to XCAP server using OMA pres-content application, replicated among multiple Blink instances and location of icons storage URL on XCAP server is published in PIDF.

h3. Offline Presence

In status menu, one can change its presence state and also an offline state when Blink is offline. This is done using pidf-manipulation XCAP application.

h3. Media Capabilities

Type of media supported by the end-point.

h3. Device Information

The following information is published:

 * Hostname

 * Time offset

 * Idle status

 * GRUU contact address

h2. Subscribe To Presence

Using SIP SUBSCRIBE for RLS, Bink subscribes to the SIP addresses stored in rls-services document uploaded on the XCAP server by contacts management actions in the GUI (add/update/delete contacts).

h3. Presence Notifications

Presence information received from the SIP URIs as RLMI notifications from the RLS server is used to update each contact in the contacts list with:

 * Status icon overlaid on botton right of user icon, indicating away, busy, extended-away or available

 * Rectangular presence indicator on right side of the tile to provide a quick overview about availability

 * Presence note is rendered on second line, multiple notes and pending authorizations are rotated every 10 seconds

 * User icon is retrieved and updated when necessary from URL advertised by user 

Selecting  Show Presence Information menu item from contextual contact menu show a panel with detailed information, not all information may have been rendered in the GUI.

h2. Sessions

 * When subscribed to Presence, if information is received, the contextual menu of each contact is updated with the possibility of starting a session to a specific device. This requires the remote device to use GRUU.