SipDeviceConfiguration » History » Version 19
Adrian Georgescu, 04/19/2009 02:32 PM
| 1 | 3 | Adrian Georgescu | = Device configuration = |
|---|---|---|---|
| 2 | 1 | Adrian Georgescu | |
| 3 | 2 | Adrian Georgescu | [[TOC(WikiStart, Sip*, depth=3)]] |
| 4 | |||
| 5 | 4 | Adrian Georgescu | Setup your SIP application software or hardware device as follows: |
| 6 | 1 | Adrian Georgescu | |
| 7 | == General == |
||
| 8 | |||
| 9 | 13 | Adrian Georgescu | || Username || XXX|| |
| 10 | || Password|| YYY|| |
||
| 11 | || Domain||sip2sip.info|| |
||
| 12 | || Outboud proxy ||proxy.sipthor.net|| |
||
| 13 | 1 | Adrian Georgescu | |
| 14 | 7 | Adrian Georgescu | Replace XXX with your username and YYY with your password received during the registration of your SIP account. |
| 15 | 1 | Adrian Georgescu | |
| 16 | 9 | Adrian Georgescu | We recommend that you: |
| 17 | |||
| 18 | 11 | Adrian Georgescu | 1. Always register and set the refresh interval to 600 seconds or longer |
| 19 | 19 | Adrian Georgescu | 1. Always use the provided outbound proxy |
| 20 | 12 | Adrian Georgescu | 1. Disable any keep-alive technique in the client (like pings, NOTIFY or STUN), the servers take care of all these automatically |
| 21 | 18 | Adrian Georgescu | 1. Disable any SIP ALG support in the border router, most of the so called 'SIP enabled routers' on the market today are [http://www.voip-info.org/wiki/view/Routers+SIP+ALG broken] |
| 22 | 15 | Adrian Georgescu | 1. Disable voice activation detection (VAD) in your device |
| 23 | 9 | Adrian Georgescu | |
| 24 | 7 | Adrian Georgescu | |
| 25 | 1 | Adrian Georgescu | == XCAP root == |
| 26 | |||
| 27 | If you use SIP SIMPLE presence you need to set XCAP root: |
||
| 28 | |||
| 29 | 14 | Adrian Georgescu | || XCAP root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ || |
| 30 | 1 | Adrian Georgescu | |
| 31 | == MSRP relay == |
||
| 32 | |||
| 33 | 7 | Adrian Georgescu | If you use SIP SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info. |