SipDeviceConfiguration » History » Version 24
Adrian Georgescu, 04/19/2009 07:36 PM
| 1 | 3 | Adrian Georgescu | = Device configuration = |
|---|---|---|---|
| 2 | 1 | Adrian Georgescu | |
| 3 | 2 | Adrian Georgescu | [[TOC(WikiStart, Sip*, depth=3)]] |
| 4 | |||
| 5 | 4 | Adrian Georgescu | Setup your SIP application software or hardware device as follows: |
| 6 | 1 | Adrian Georgescu | |
| 7 | 20 | Adrian Georgescu | == Authentication == |
| 8 | 1 | Adrian Georgescu | |
| 9 | 13 | Adrian Georgescu | || Username || XXX|| |
| 10 | || Password|| YYY|| |
||
| 11 | 1 | Adrian Georgescu | || Domain||sip2sip.info|| |
| 12 | 20 | Adrian Georgescu | |
| 13 | 22 | Adrian Georgescu | * Replace XXX with your username and YYY with your password received during the registration of your SIP account |
| 14 | 23 | Adrian Georgescu | * Always register |
| 15 | * Set the Registration refresh interval to 600 seconds |
||
| 16 | 20 | Adrian Georgescu | |
| 17 | == Outbound proxy == |
||
| 18 | |||
| 19 | 1 | Adrian Georgescu | || Outboud proxy ||proxy.sipthor.net|| |
| 20 | |||
| 21 | 20 | Adrian Georgescu | == NAT traversal == |
| 22 | 11 | Adrian Georgescu | |
| 23 | 24 | Adrian Georgescu | Practically you do not need to set anything special in the client, NAT traversal is solved automatically by the SIP2SIP server infrastructure. We recommend actually that you check to have disabled all client features related to NAT traversal: |
| 24 | 12 | Adrian Georgescu | |
| 25 | 20 | Adrian Georgescu | 1. Always use the outbound proxy |
| 26 | 1. Disable any keep-alive technique like PING, NOTIFY, OPTION, CR/LF or STUN |
||
| 27 | 1. Disable any SIP ALG support in the border router, most of the so called 'SIP enabled' routers on the market today are [http://www.voip-info.org/wiki/view/Routers+SIP+ALG simply broken] |
||
| 28 | 7 | Adrian Georgescu | 1. Disable voice activation detection (VAD) in your device |
| 29 | 1 | Adrian Georgescu | |
| 30 | |||
| 31 | == XCAP root == |
||
| 32 | |||
| 33 | 14 | Adrian Georgescu | If you use SIP SIMPLE presence you need to set XCAP root: |
| 34 | 1 | Adrian Georgescu | |
| 35 | || XCAP root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ || |
||
| 36 | |||
| 37 | 7 | Adrian Georgescu | == MSRP relay == |
| 38 | 1 | Adrian Georgescu | |
| 39 | If you use SIP SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info. |