SipDeviceConfiguration » History » Version 31
Adrian Georgescu, 10/04/2009 01:18 PM
| 1 | 31 | Adrian Georgescu | = Device Configuration = |
|---|---|---|---|
| 2 | 1 | Adrian Georgescu | |
| 3 | 2 | Adrian Georgescu | [[TOC(WikiStart, Sip*, depth=3)]] |
| 4 | |||
| 5 | 4 | Adrian Georgescu | Setup your SIP application software or hardware device as follows: |
| 6 | 1 | Adrian Georgescu | |
| 7 | 30 | Adrian Georgescu | == Credentials == |
| 8 | 1 | Adrian Georgescu | |
| 9 | 30 | Adrian Georgescu | Credentials are used for authentication and authorization of SIP requests performed by the SIP device. |
| 10 | |||
| 11 | 13 | Adrian Georgescu | || Username || XXX|| |
| 12 | || Password|| YYY|| |
||
| 13 | 1 | Adrian Georgescu | || Domain||sip2sip.info|| |
| 14 | 20 | Adrian Georgescu | |
| 15 | 22 | Adrian Georgescu | * Replace XXX with your username and YYY with your password received during the registration of your SIP account |
| 16 | 23 | Adrian Georgescu | * Always register |
| 17 | * Set the Registration refresh interval to 600 seconds |
||
| 18 | 20 | Adrian Georgescu | |
| 19 | 27 | Adrian Georgescu | [wiki:SipDevices Specific SIP devices configuration] |
| 20 | |||
| 21 | 20 | Adrian Georgescu | == Outbound proxy == |
| 22 | 1 | Adrian Georgescu | |
| 23 | || Outboud proxy ||proxy.sipthor.net|| |
||
| 24 | |||
| 25 | 30 | Adrian Georgescu | Though optional, is recommend that you always use the outbound proxy setting as this helps the NAT traversal and your device remains always reachable. |
| 26 | 1 | Adrian Georgescu | |
| 27 | == XCAP root == |
||
| 28 | |||
| 29 | If you use SIP SIMPLE presence you need to set XCAP root: |
||
| 30 | |||
| 31 | 20 | Adrian Georgescu | || XCAP root || https://xcap.sipthor.net/xcap-root@sip2sip.info/ || |
| 32 | 7 | Adrian Georgescu | |
| 33 | 1 | Adrian Georgescu | == MSRP relay == |
| 34 | |||
| 35 | If you use SIP SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info. |
||
| 36 | 30 | Adrian Georgescu | |
| 37 | '''NAT traversal''' |
||
| 38 | |||
| 39 | Practically you do not need to set anything special in the client, NAT traversal is solved automatically by the SIP2SIP server infrastructure. We recommend actually that you check to have disabled all client features related to NAT traversal: |
||
| 40 | |||
| 41 | 1. Disable any keep-alive technique like PING, NOTIFY, OPTION, CR/LF or STUN |
||
| 42 | 1. Disable any SIP ALG support in the border router, most of the so called 'SIP enabled' routers on the market today are [http://www.voip-info.org/wiki/view/Routers+SIP+ALG simply broken] |
||
| 43 | 1. Disable voice activation detection (VAD) in your device |