« Previous - Version 40/109 (diff) - Next » - Current version
Adrian Georgescu, 09/06/2011 09:58 am

= Device Configuration =

<acronym title="WikiStart, Sip*, depth=3">TOC</acronym>

There are thousands of SIP devices on the market, for how to configure them we advise you to consult the support forum of the device manufacturer.

Please do not open a ticket related to how a particular device must be configured.

Setup your SIP device as follows:

Account Credentials

Account credentials are used for authentication and authorization of SIP requests performed by the SIP device.

Username XXX
Password YYY
Domain sip2sip.info
  • Replace XXX with your username and YYY with your password received during the registration of your SIP account
  • Always Register must be On
  • Set the Registration refresh interval to 600 seconds

SIP2SIP has a self organizing architecture with multiple active servers in multiple data centers. The address of the server must be automatically discovered by the SIP device by using DNS as described in RFC3263.

[wiki:SipDevices Specific SIP devices configuration]

SIP Outbound Proxy

To traverse NAT you must use the proxy server:

Host Port Protocol
proxy.sipthor.net 5060 UDP
XCAP root

If you use SIMPLE presence you need to set XCAP root:

XCAP Root https://xcap.sipthor.net/xcap-root@sip2sip.info/
MSRP Relay

If you use SIMPLE instant messaging based on MSRP, a relay is available for helping traverse the NAT. You need to use the relay if you are the receiving party and you are behind a NAT-ed router. The MSRP relays can be found in the DNS by using SRV lookup for _msrps._tcp.sip2sip.info.