SylkServer

h1. Configuration

h2. General settings

To change the default settings copy config.ini.sample  to /etc/sylkserver/config.ini

<pre>

; SylkServer configuration file

[Server]

; The following settings are the default used by the software, uncomment

; them only if you want to make changes

; default_application = conference

; Map user part of the Request URI to a specific application

; application_map = 123:conference,test:irc-conference

; trace_dir = /var/log/sylkserver

; trace_core = False

; trace_sip = False

; trace_msrp = False

; trace_notifications = False

; TLS can be used for encryption of SIP signaling and MSRP media. TLS is

; disabled by default.  To enable TLS, you must have a valid X.509

; certificate and configure it below, then set the local_tls_port in the SIP

; section and use_tls in MSRP section

; The X.509 Certificate Authorities file

; ca_file = /etc/sylkserver/tls/ca.crt

; The file containing X.509 certificate and private key in unencrypted format

; certificate = /etc/sylkserver/tls/default.crt

; verify_server = False

[SIP]

; SIP transport settings

; IP address used for SIP signaling; empty string or any means listen on interface used

; by the default route

; local_ip =

; Ports used for SIP transports, if not set to any value the transport will be disabled

; local_udp_port = 5060

; local_tcp_port = 5060

; local_tls_port = 5061

; If set all outbound SIP requests will be sent through this SIP proxy

; outbound_proxy =

; A comma-separated list of hosts or networks to trust.

; The elements can be an IP address in CIDR format, a

; hostname or an IP address (in the latter 2 a mask of 32

; is assumed), or the special keywords 'any' and 'none'

; (being equivalent to 0.0.0.0/0 and 0.0.0.0/32

; respectively). It defaults to 'any'.

; trusted_peers =

[MSRP]

; MSRP transport settings

; A valid X.509 certificate is required for MSRP to work over TLS.

; TLS is enabled by default, a default TLS certificate is provided with SylkServer.

; use_tls = True

[RTP]

; RTP transport settings

; Allowed codec list, valid values: G722, speex, PCMU, PCMA, iLBC, GSM

; audio_codecs = G722,speex,PCMU,PCMA

; Port range used for RTP

; port_range = 50000:50500

; SRTP valid values: disabled, mandatory, optional

; srtp_encryption = optional

; RTP stream timeout, session will be disconnected after this value

; timeout = 30

</pre>

h2. Applications settings

h3. Conference

To change the default settings copy conference.ini.sample  to /etc/sylkserver/conference.ini

<pre>

; SylkServer Conference application configuration file

[Conference]

; The following settings are the default used by the software, uncomment them

; only if you want to make changes

; db_uri = sqlite:///var/lib/sylkserver/conference.sqlite

; Database table name for storing messages history

; history_table = message_history

; Replay last chat messages after joining a room

; replay_history = 20

; Directory for storing files transferred to rooms (a subdirectory for each room will be created)

; file_transfer_dir = /var/spool/sylkserver

; File transfer push support. If enabled files will be pushed to all active

; participants after receiving the file

; push_file_transfer = False

; Directory where images use by the Screen Sharing functionality will be stored

; screen_sharing_dir = /var/spool/sylkserver/screensharing

; IP address used for serving Screen Sharing HTTP requests, empty string means listen on interface used

; by the default route

; screen_sharing_ip =

; Port where Screen Sharing HTTP server will listen on, set to 0 for random

; screen_sharing_port = 0

; Use HTTPS instead of HTTP

; screen_sharing_use_https = True

; Server certificate for HTTPS connections

; screen_sharing_certificate = /etc/sylkserver/tls/default.crt

; Advertise the conference server and each room in Bonjour

; use_bonjour = False

; Access Lists Default Policy

; Apache-style access lists for the caller using SIP domains or SIP URIs

; https://httpd.apache.org/docs/2.2/mod/mod_authz_host.html#order

;

; access_policy = allow, deny

; allow = all

; deny = none

; Access Lists can be applied per room overriding the Default Policy

;

; [test@domain.com]

; access_policy = allow, deny

; allow = example.com, test@domain.com

; deny = all

</pre>

h3. XMPP gateway

To change the default settings copy xmppgateway.ini.sample  to /etc/sylkserver/xmppgateway.ini

<pre>

; SylkServer XMPP gateway application configuration file

[general]

; Comma-separated list of domains for which this server is responsible

; Add the xmmp-server records into the DNS server responsable for these domains

; At least one domain is required!

; domains =

; The following settings are the default used by the software, uncomment

; them only if you want to make changes

; Prefix that will be appended to all domains in the above setting, which will

; be used as a Multi User Chat (MUC) component

; muc_prefix = conference

; IP address used for listening to XMPP connections; empty string or any means listen on interface used

; by the default route

; local_ip =

; local_port = 5269

; If set to True (default) MSRP will be used to translate XMPP Instant Messaging, else SIP MESSAGE will be used

; Note: XMPP 'normal' messages (not chat messages) are always translated to SIP MESSAGE requests

; use_msrp_for_chat = True

; Timeout to terminate a SIP session if no chat traffic was received

; sip_session_timeout = 600

; Enable verbose logging of XMPP stantzas

; trace_xmpp = False

</pre>

h3. IRC

To change the default settings copy ircconference.ini.sample  to /etc/sylkserver/ircconference.ini

<pre>

[123]

channel = test

server = irc.freenode.net:6667

</pre>